Wednesday, November 28, 2012

Stellaris Launchpad MOD Player

It is time for a new post!

Added SD Card, S3M and visualizer support see here link.

Recently I got myself a Stellaris Launchpad board by TI and thought what I could do with it.
I decided to create a simple MOD player with the bear minimum of extra parts and so here is the
result:

The details:
The code I've ported from a Microchip pic32 MIPS based MCU that was done here by SERVEURPERSO:
http://www.youtube.com/watch?v=i3Yl0TISQBE

Had to redo all the PWM/Timers/Buttons/File system and other stuff.
Learned a lot from the PWM tutorial for Stellaris here:
http://codeandlife.com/2012/10/30/stellaris-launchpad-pwm-tutorial/

The video recording was done using PC LINE IN and in stereo and because of that there is a faint whine in the background but the sound that comes directly from the board is much better.

The board supports only 4 channel MODs technically you can put a MOD with more channels but there is no memory allocated for them, so the results are unpredictable.
There is enough space on the device for 213Kb of MODs.
Right now the code is set to take up-to 6 MODS, you can change it if you want (as long as you keep below the 213Kb limit)

Because I did not have an SD card breakout board I had to load the files from somewhere
so I've created VFS (Virtual File System) which helped a lot during development, the files reside inside the
flash of the MCU.
It should be fairly easy to switch to FatFs since I've used the same prototype functions.

SD support will probably come in the future (when I get a SD breakout board)

Technical difficulties:
While porting this I've encountered several difficulties:
1. The amount of RAM on the pic32 device was 3 times what we had (96K vs our 32K)
     had to shrink the buffers a lot, will see how it affects while reading from SD card.
2. PWM code completely different, had to understand both architectures and settings to rewrite
    it correctly.
3. Timing for the sampler interrupt is CRITICAL even a small difference in invocation
    would cause popping and beeping in sound.
4. Interrupt priorities, after adding the buttons handling (which are polled using the systick interrupt) I've       noticed that the sound would be distorted, which I've concluded was due to the sampler interrupt not getting enough time to run or was itself was being interrupted, a code to set priorities to interrupts was added.

Hardware:
1 x Stellaris Launchpad
1 x Audio Jack

Schematics:
Take the audio jack connect the GND pin to the GND pin on the board J3.2
LEFT channel is J1.7 (PB4)
RIGHT channel is J2.7 (PB6)

Usage:
Right button next song
Left button previous song.

If connected to computer the serial terminal writes some info about the song that is playing.

File:
Attached is the whole project, source, binary and convert tool for mods.
Download project.

To use the convert tool: after extracting the project to Stellarisware directory.
NOTICE: My Stellarisware directory is called Stellarisware2 so some adjustments might be necessary in order to compile the sources, the project should be placed next to the other projects:
C:\StellarisWare2\boards\ek-lm4f120xl\modplayer

go into the tools directory copy all your wanted MODS to that dir and run "runconvert.bat"

To get more mods go to: http://modarchive.org/

Hope that helps anybody.
R.K.

Monday, June 11, 2012

Constellaris - A puzzle Game

Hello All,
I'ts been a while since I've posted last, but I've been busy writing my own game instead of
porting existing ones.

So here it is,
It's called Constellaris and it's for Android platform and now I'm going to shamelessly promote it...

This is a simple puzzle game where you need to draw constellations (basically connect the dots)
You need to bridge two stars on screen without tracing back so that in the end 
you will have the same shape that is traced in the background.
Each level increases the level of difficulty.

You have a hints systems that helps you along the way if you get stuck and some options for convenience (Undo, clear and etc).


Menu Screen:
Inline image 1

Level Selection:
Inline image 2

In game screen shoot:
Inline image 3

Video of the game play:

There are two versions free and paid, the difference is that the paid version has 27 more levels and no Ads.



Hope you like it.

You can also visit my site: http://www.octa44.com

Thanks!